Setting up a Brick Paver Walkway or Building Cement Bricks

The usage of Bricks or Pavers to create a walkway or patio matches a house in a way that is unequaled. In addition, setting up a Brick or Paver walkway does not always need a pro.

The secret to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. In addition, string lines need to be strung on each side of the pathway.
Once the area has actually been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline need to equal the thickness of the brick or paver.

Now that you have a steady base, put a 1" pipeline or journal board the length of the walkway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared area. These strips will act as your walkway border and read more help to maintain the integrity and shape of the walkway.

The key to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again help maintain the stability of the sidewalk.

Inevitably bricks/pavers will require to be cut or split when building the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with extra sand, and then shovel in the topsoil and load down firmly.
Spread stone dust over the new sidewalk and sweep into the cracks. Repeat this procedure a couple of times to make sure the cracks are completely filled. This will finish the read more interlocking of the bricks and help to get rid of any weed development. Just include grass seed to the outdoors edges and you need to have a stunning entryway to your home within a couple of weeks.


In addition, setting up a Brick or Paver sidewalk does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, position a 1" pipeline or ledger board the length of the pathway on either side of the pathway. These strips will act as your sidewalk border and help to maintain the integrity and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or split when constructing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *